023 8066 0883

5050 IP68 Waterproof Flexible LED Strip Kits

£26.26£409.96 (ex vat)

Clear selection
SKU: N/A. Category: .

We are one of the very few to supply this type of fully waterproof flexible LED strip. The bare LED strip is totally encapsulated in a flexible rubber channel meaning it can stand up to the elements outside and create wonderful effects in both domestic and commercial installations.

 

With each kit you will receive the length of strip with cable tail attached and sealed into the casing, the required transformer and the colour change receiver and remote control if you are purchasing the RGB colour change version.

 

For lengths up to 5 metres long we supply 12 volt LED strip with the black plug and play driver as shown in the image above and for lengths over 5 metres we supply 24 volt LED strip with the silver driver shown in the image above. In both cases the drivers are not IP rated so will need to be put into an enclosure, we can supply fully waterproof drivers as an option just use the form below to give us the details of your requirement and our team will come back with a quotation.

 

A popular question we are asked, is the 24 volt LED strip brighter than the 12 volt LED strip? No is the answer they are exactly the same brightness we just use 24 volt LED strip to avoid volt drops on longer kits on LED strip.

If you are ordering the RGB colour change type, you do not need to point the remote control at the receiver it all works on radio frequency with a 20-25 metre range so you can tuck the receiver away in the enclosure with the driver.

 

So what functions does the colour change remote control have?

 

On/off

Dimming

Superb round colour change wheel, run your finger around the wheel to change colour

9 preset colour change sequences, fade, flash with the various colours.

 

When ordering this product please allow 14-21 days for delivery as each length is custom made to order.

 

Some of our frequently asked questions:

 

Will the colour change strip make a white colour?

 

Yes it will but the white it produces is a very blusih white as it is mxing the red green and blue LED’s to create the white colour so our advice is do not buy this is if you want a warm white colour.

 

How much cable do you supply?

 

We supply 1 metre of cable, we can supply more on request.

 

Wiring Diagram

 

RGB-Wiring-Layout

 

 

 

If you are looking for a custom made kit with specific lengths, corners and additional cable lengths use our form below to give us all the details, we don’t charge any more for this service and you will only pay for what you need.

 

Custom Made Kit Quotation Form

  • LED strip requirement

    Please complete as much of the form below as you can. If you have any questions then please call us on 023 80660883 or refer to our comprehensive FAQs section.
  • Please enter the length of LED strip you require in metres. For example '2.6 metres' Lengths are available up to 19 metres and can be cut every 50mm on 12 volt and 100mm on 24 volt. Please allow for this when you measure
  • Please choose your colour
  • Please choose if you need non waterproof, water resistant or fully waterproof exterior use LED strip.
  • Please choose high or low power. Refer to our FAQ section for more information on this.
Driver Supplied With Kit

Yes

Driver IP Rating

IP20

Cut Point

12 volt every 50mm – 24 volt every 100mm

Width of Strip

10mm

Backing Type

3M Self Adhesive

Power

High Power – 5050

Wattage Per Metre

14.4 Watts per metre

LED Strip IP Rating

IP65

Output Voltage

Up to 5 Metres 12 volt DC – Over 5 metres 24 volt DC

LEDs Per Metre

60

LED Life

50,000 hours

Guarantee

12 months

Beam Angle

120 degree

Kit Includes

LED Strip – Driver – Cables – Colour change receiver and remote control

Cable Supplied

1 Metre

Leave a Reply